I had built lots of wheels with this hub in 2021.
The reason:
This hub can be converted a few width and is reasonable.
I had more opportunities to build wheels for disc brake frames than rim brake frames.
Let me show you how to convert the width at this time.
The front hub comes 100mm x 15mm non-boost thru axle in box.
You can take the parts using your finger.
The conversion parts comes 2 types, one is 12mm thru axle and another is for quick release.
You can put them with your finger. They are the same right and left.
The rear hub comes 142mm × 12mm non-boost in box.
The conversion parts include for only quick release.
Basically, you can take them out with your finger. If you could not do it, I would recommend to use a plier with pad.
Like this, using pad would not scratch the hub.
The right conversion part and the left one are a bit different.
The part with flange is for the non-drive side.
Et Voila!
The hub converted to the 135mm quick release hub.
The hub rolls really well with sealed bearings. It can be used versatile that comes really in handy.
This is the MVH (Most Valuable Hub) in 2021 for me!
